On average, replacing a door costs roughly $500 to $2,000, according to home services website Angi. However, the actual cost for your particular door will depend on whether it’s an interior or exterior door, the material, the style of door, and any customization needed during installation.
Interior doors tend to cost less than exterior doors, typically between $100 and $2,500, depending on the type. Prices vary based on the type of interior door, its material, and whether it is a slab door or a pre-hung door.
🤓Nerdy Tip
A pre-hung door comes with a ready-made frame that already includes hinges. Pre-hung doors make installation simpler, but are more expensive than a slab door. A slab door can work if the size fits your existing frame.
Interior door cost by type
Interior doors come in a variety of styles, which use different amounts of materials and require different installation techniques. Costs are higher for more complex designs and installations that require moving plumbing or electric cables, for example. Here are common door types, their average installation cost and helpful features.
Low sound-dampening, but simple to install. Best for closet doors.
Must make space for pocket door to slide into wall, which requires additional labor and sometimes other materials.
Simplest door type. Includes the body of the door with a doorknob hole cut. Requires hinges and a square frame to fit into.
Attached by hinges to a pre-fabricated frame that can slot into a door space and be adjusted to fully seal.
Interior door cost by material
Many interior doors are wooden, though some are made of aluminum or include a mirrored surface. Wooden doors vary in cost from hollow to solid. Here are the most common interior door materials, what they cost and what to know.
Better sound dampening with the look and texture of real wood.
Can visually expand a space. Typically used for sliding closet doors.
Exterior doors cost nearly $1,500 on average, but you might pay as little as $200 for a simple screen door or as much as $6,000 for a large double or French door. Exterior doors are often more complex because they protect from sound, weather events, fires and forced entry. Adding a storm door or screen door increases the cost.
Exterior door cost by type
Exterior door costs depend on the type and materials used. Here are common exterior door types, their average cost range and important features.
Ranges from very basic to luxury or custom materials.
Typically more costly than installing two separate doors, but can look more inviting.
Designed to contain fire, ideally preventing spread while a fire is put out.
Useful in places where a swinging open door would take up too much space.
Typically installed in addition to an external door. Storm doors protect against weather and screen doors allow air flow without bug intrusion.
May require installing in the home’s foundation and excavating or grading the area to allow for a safe exit.
Door installation labor cost
Door installation contractors typically charge $40 to $90 per hour, while more general handyperson services can cost a lower rate of $30 to $40 an hour. If you need multiple doors installed, you may be able to get a labor discount for doing them all at once.
Standard door installations, using the most common door shapes, sizes and hardware, typically cost less. Assume additional labor costs if:
You need a door replaced immediately.
Your door is not a standard size.
The original frame has extensive or unusual damage.
You’ll be having the company remove and dispose of the old door for you.
Additional factors that affect door cost
Add-ons and customizations can make your new door a better fit for your home, but some can be pricey. Here are a few common add-ons and what you can expect to pay:
Adding a pet door: $100 to $500.
Window panels or transoms: $1,600 to $4,600.
Trim or casing: $0.60 to $1.20 per linear foot.
Hardware such as doorknobs, hinges and locks: up to $300.
Ways to save on door costs
A custom door made with rare materials and lots of add-ons can cost thousands of dollars. However, many homes can look great with simpler designs that are a better fit for a smaller home improvement budget. We consulted experts and found several ways to save:
1. Choose materials wisely. “Fiberglass doors cost less than wood, but more than steel, and have a good balance of style, durability and energy efficiency,” says Justin Olewack, President of BOLT Builders. “Steel doors are usually the most affordable, but any custom finishes or wood grain patterns you add do increase the price.”
2. Reduce customization. Anything that makes a door custom or unique is likely to result in higher costs. “If you’re looking to save money without sacrificing quality, start by choosing a door material that meets your needs without overbuilding,” Olewack says. “Select a standard size to avoid costly custom fabrication.”
3. Be strategic with add-ons. “Installation costs can also be driven upwards by things like a uniquely shaped door frame, the use of energy-efficient glass, custom hardware or weatherproofing,” says Ron Shimek, President of Mr. Handyman, a Neighborly company.
4. Look for alternatives. You can achieve a stylish look by painting the door instead of expensive architectural add-ons if you’re on a budget,” Olewack says.
-1024x768.jpg "Red Snapper Used as Cudgel by Fed Judge")
